Time & Tide Clock Movements (1/4" Max Dial Thickness)
| Quantity | 1 - 4 | 5 - 9 | 10+ |
| Price | $35.95 | $26.50 | $19.99 |
| Each Time and Tide Clock Movement | |||
Make a clock that combines a tide movement with a traditional quartz clock movement.
This USA Made quartz Time and Tide movement tells you both the time as well as the tide! It has the ability to run the standard hour, minute and second hands as well as a tide hand. 5/16" threaded shaft for up to 1/4" dial thickness.
Two Things to Choose to complete your order
1) Your Choice of Red Tide Handed included for free. Click here to choose from a 3" red tide hand or a 1-5/8" Red Tide Hand. Mounting Hardware included.
2) Choose one Free set of clock hands for each Time and Tide Movement ordered.
Time and Tide Dial sold separately.
1 Year Warranty
Dimensions: 2-1/8" wide x 2-7/8" high x 1" depth.
Threaded Shaft Length: 3/8"
Threaded Shaft Diameter: 7/16
Overall Shaft Length: 7/8"
Install a FRESH Duracell or Energizer Battery (But not a rechargeable type). In our experience, these are the only batteries that are reliable for clock mechanisms.
Write a Review || | Explore all
Featured positive reviews:
The Tide Clock movement and hands that I ordered were just what I needed. The process was easy, and arrived on time and in great condition. This was my first time ordering from your company, and it proved to be a great experience. If needed, I would not hesitate to place an order once again with Bear Woods. Thank you.
Retro fitted this movement into an old Harold Miller Tide clock. had to shim it back into case becuase the glass was too low , and could not use the second hand. but it works fine and seems to stay close to our SC coastal tide.
Had issues with the movement after 2 emails , I received a new unit promptly. Great service
Just what was need to repair my MCM clock and add functionality.
Thanks so much....
One tide clock already done.....
The time & tide clock works great, easy to install
Received as ordered.
**When repairing a clock we always recommend new hands as your old ones may not fit.
Dimensions: 2-1/8" wide x 2-7/8" high x 1" depth.
Threaded Shaft Length: 3/8"
Threaded Shaft Diameter: 7/16
Overall Shaft Length: 7/8"
Hardware Included
Optional Hardware
| Add an Black Endcap for $0.50 |  |
|
| Add an Open End Nut for $0.50 |  |
Make a clock that combines a tide movement with a traditional quartz clock movement.
This USA Made quartz Time and Tide movement tells you both the time as well as the tide! It has the ability to run the standard hour, minute and second hands as well as a tide hand. 5/16" threaded shaft for up to 1/4" dial thickness.
Two Things to Choose to complete your order
1) Your Choice of Red Tide Handed included for free. Click here to choose from a 3" red tide hand or a 1-5/8" Red Tide Hand. Mounting Hardware included.
2) Choose one Free set of clock hands for each Time and Tide Movement ordered.
Time and Tide Dial sold separately.
1 Year Warranty
Dimensions: 2-1/8" wide x 2-7/8" high x 1" depth.
Threaded Shaft Length: 3/8"
Threaded Shaft Diameter: 7/16
Overall Shaft Length: 7/8"
Write a Review || | Explore all
Featured positive reviews:
The Tide Clock movement and hands that I ordered were just what I needed. The process was easy, and arrived on time and in great condition. This was my first time ordering from your company, and it proved to be a great experience. If needed, I would not hesitate to place an order once again with Bear Woods. Thank you.
Retro fitted this movement into an old Harold Miller Tide clock. had to shim it back into case becuase the glass was too low , and could not use the second hand. but it works fine and seems to stay close to our SC coastal tide.
Had issues with the movement after 2 emails , I received a new unit promptly. Great service
Just what was need to repair my MCM clock and add functionality.
Thanks so much....
One tide clock already done.....
The time & tide clock works great, easy to install
Received as ordered.
Install a FRESH Duracell or Energizer Battery (But not a rechargeable type). In our experience, these are the only batteries that are reliable for clock mechanisms.
**When repairing a clock we always recommend new hands as your old ones may not fit.
Dimensions: 2-1/8" wide x 2-7/8" high x 1" depth.
Threaded Shaft Length: 3/8"
Threaded Shaft Diameter: 7/16
Overall Shaft Length: 7/8"
Hardware Included
Optional Hardware
| Add an Black Endcap for $0.50 | |
|
| Add an Open End Nut for $0.50 | |
Kit - USA Made High-Torque Quartz Clock Mechanism with Hands for 24" Diameter Clock
Add to Cart
Home
Wishlist
Account
Cart