Clock Hands 2-1/16" for sale Brass (For up to 6" Dial diameter)

Quantity   1 - 9     10 - 49     50+  
Price $1.95 $1.75 $1.25
Per Set of Clock Hands
Part #: QH-404A
  $1.95 *

2-1/16" Clock Hands - Brass

•     Fits up to 6" Dial diameter

•     Free with purchase of clock movement

•     Includes Hour hand, Minute hand.

Clock hands are free with the purchase of our clock movements - or $1.50 per set.

how to choose clock movements and hands

How do I choose the right size clock motor & hands? 
1) Refer to the figure here, or Click Here for helpful info (a new window or tab will open)  

2) The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4) 

3) Our clock motors are sized by the thickness of the dial the movements can go through.  EG. High torque Q-64 will go through up to 5/8" thick material, while standard/mini motor Q-11 will go through 1/8" thick clock faces. (Figure 1 and  item "A" in Figure 2)


Tip 1)  If your material is too thick, consider removing some to in-set the clock.  Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face. 

Tip 2) Most hands can be slightly trimmed if need be.

Tip 3) Our customers also spray paint them. 

2-1/16" Clock Hands - Brass

•     Fits up to 6" Dial diameter

•     Free with purchase of clock movement

•     Includes Hour hand, Minute hand.

Clock hands are free with the purchase of our clock movements - or $1.50 per set.

Reviews

Write a Review || | No reviews for this product.

how to choose clock movements and hands

How do I choose the right size clock motor & hands? 
1) Refer to the figure here, or Click Here for helpful info (a new window or tab will open)  

2) The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4) 

3) Our clock motors are sized by the thickness of the dial the movements can go through.  EG. High torque Q-64 will go through up to 5/8" thick material, while standard/mini motor Q-11 will go through 1/8" thick clock faces. (Figure 1 and  item "A" in Figure 2)


Tip 1)  If your material is too thick, consider removing some to in-set the clock.  Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face. 

Tip 2) Most hands can be slightly trimmed if need be.

Tip 3) Our customers also spray paint them.