Clock Hands 1-7/8" for sale Black (For up to 4-1/2" Dial diameter)
| Quantity | 1 - 9 | 10 - 49 | 50+ |
| Price | $1.95 | $1.75 | $1.25 |
| Per Set of Clock Hands | |||
1-7/8" Clock Hands - Black
• Fits up to 4-1/2" Dial diameter
• Free with purchase of clock movement
• Includes Hour hand, Minute hand
• Second hand not included
Clock hands are free with the purchase of our clock movements - or $1.50 per set.
|
How do I choose the right size clock motor & hands? 2) The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4) 3) Our clock motors are sized by the thickness of the dial the movements can go through. EG. High torque Q-64 will go through up to 5/8" thick material, while standard/mini motor Q-11 will go through 1/8" thick clock faces. (Figure 1 and item "A" in Figure 2) Tip 1) If your material is too thick, consider removing some to in-set the clock. Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face. Tip 2) Most hands can be slightly trimmed if need be. Tip 3) Our customers also spray paint them. |
If you don't have your clock motor yet...
Click here to Choose Suitable Clock Motors that work with these hands.
Write a Review || | Explore all
Featured positive reviews:
I was in need of a new clock mechanism and hands for an mid-80s New Haven 'Daily Bread' wall clock. I couldn't find the exact mechanism to re-use the hands I already had, so I had to purchase something similar. These were close enough to the originals, although they are a little thinner and you have to be really careful not to bend them. They're not very robust but are fully functional otherwise.
I put these on a simple clock and they gave it a very contemporary, stylish look.
1-7/8" Clock Hands - Black
• Fits up to 4-1/2" Dial diameter
• Free with purchase of clock movement
• Includes Hour hand, Minute hand
• Second hand not included
Clock hands are free with the purchase of our clock movements - or $1.50 per set.
Write a Review || | Explore all
Featured positive reviews:
I was in need of a new clock mechanism and hands for an mid-80s New Haven 'Daily Bread' wall clock. I couldn't find the exact mechanism to re-use the hands I already had, so I had to purchase something similar. These were close enough to the originals, although they are a little thinner and you have to be really careful not to bend them. They're not very robust but are fully functional otherwise.
I put these on a simple clock and they gave it a very contemporary, stylish look.
|
How do I choose the right size clock motor & hands? 2) The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4) 3) Our clock motors are sized by the thickness of the dial the movements can go through. EG. High torque Q-64 will go through up to 5/8" thick material, while standard/mini motor Q-11 will go through 1/8" thick clock faces. (Figure 1 and item "A" in Figure 2) Tip 1) If your material is too thick, consider removing some to in-set the clock. Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face. Tip 2) Most hands can be slightly trimmed if need be. Tip 3) Our customers also spray paint them. |
If you don't have your clock motor yet...
Click here to Choose Suitable Clock Motors that work with these hands.
Home
Wishlist
Account
Cart