1/4" Shaft, Very Coarse Cylinder Burr (3/4" x 1") by Kutzall
The Kutzall Original tool line provides a fast stock removal with an outstanding finish, making them the most universal and best value of Kutzall tools. The 1/4" shaft burrs are used in flex shaft tools, hand grinders, or other machinery using 1/4" collets or adjustable chucks. They are not prone to loading but may easily be cleaned with solvent or burned clean with a gas torch; the heat won’t harm the teeth.
Kutzall Cylinder Burrs:
- Cut flat areas, or round-over edges.
- Produce 90-degree corners.
- Tilt to make V-cuts.
- Cut on both the OD and the end of the tool.
The Kutzall Original tool line provides a fast stock removal with an outstanding finish, making them the most universal and best value of Kutzall tools. The 1/4" shaft burrs are used in flex shaft tools, hand grinders, or other machinery using 1/4" collets or adjustable chucks. They are not prone to loading but may easily be cleaned with solvent or burned clean with a gas torch; the heat won’t harm the teeth.
Kutzall Cylinder Burrs:
- Cut flat areas, or round-over edges.
- Produce 90-degree corners.
- Tilt to make V-cuts.
- Cut on both the OD and the end of the tool.
Add to Cart
