4-1/2" Brass Second Hand
| Quantity | 1 - 24 | 25 - 49 | 50+ |
| Price | $1.95 | $1.75 | $1.25 |
| Per Second Hand Sweep | |||
3" Second Hand - Brass
|
How do I choose the right size clock motor & hands? 2) The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4) 3) Our clock motors are sized by the thickness of the dial the movements can go through. EG. High torque Q-64 will go through up to 5/8" thick material, while standard/mini motor Q-11 will go through 1/8" thick clock faces. (Figure 1 and item "A" in Figure 2) Tip 1) If your material is too thick, consider removing some to in-set the clock. Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face. Tip 2) Most hands can be slightly trimmed if need be. Tip 3) Our customers also spray paint them. |
If you don't have your clock motor yet...
Click here to Choose Suitable Clock Motors that work with these hands.
Write a Review || | Explore all
Featured positive reviews:
I am satisfied with the order and will reorder when needed however, additional care need to be taken on the packaging because they are fabricated out of thin material and they were slightly bent on receiving.
This is NOT a major problem and can be straightened very easy.
No problems found and acceptable. Thanks
3" Second Hand - Brass
Write a Review || | Explore all
Featured positive reviews:
I am satisfied with the order and will reorder when needed however, additional care need to be taken on the packaging because they are fabricated out of thin material and they were slightly bent on receiving.
This is NOT a major problem and can be straightened very easy.
No problems found and acceptable. Thanks
|
How do I choose the right size clock motor & hands? 2) The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4) 3) Our clock motors are sized by the thickness of the dial the movements can go through. EG. High torque Q-64 will go through up to 5/8" thick material, while standard/mini motor Q-11 will go through 1/8" thick clock faces. (Figure 1 and item "A" in Figure 2) Tip 1) If your material is too thick, consider removing some to in-set the clock. Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face. Tip 2) Most hands can be slightly trimmed if need be. Tip 3) Our customers also spray paint them. |
If you don't have your clock motor yet...
Click here to Choose Suitable Clock Motors that work with these hands.
Home
Wishlist
Account
Cart