Westminster Chime + Pendulum Quartz Clock Movement (up to 3/8" thick dial face)
| Quantity | 1 - 4 | 5 - 24 | 25+ |
| Price | $86.99 | $55.95 | $53.95 |
| Per Each Movement - Hands and Pendulum by Selection Only | |||
Westminster Chime Pendulum Quartz Clock Movements for Clock Faces up to 3/8" thick
Full-sized quartz movements with built in speaker plays a portion of the traditional Westminster Chimes melody of a grandfather clock every quarter hour, as well as counting out the hours on the hour along with the full Westminster Chimes melody. These are very popular movements, and they are very easy to use! These are great to use as replacement clockworks or when making a new clock.
Pendulum and Chime Clock Mechanisms Features:
- Pendulum + Chime Movements Case Size 3 inches wide x 4-3/4 inches high x 1-1/4 inches deep.
- Chime Synchronization Knob
- Built in Speaker, Full Westminster Chiming Functions
- 1 year Warranty
- Step Second Hand (optional)
- Powered by C Battery (Not Included)
- Mounting hardware (brass washer, hex nut, and open end nut) included. Hangers sold separately.
Westminster Pendulum Clock Mechanism Shopping Tips:
1) Choose your movement based on the thickness of the clock face/dial you are using or making. Learn how to choose the right size clock hands and clock motors.
2) Mix and Match Sizes of Pendulum Clock Movements to get a better price.
3) If you forget to add hands or the pendulum rod/bob and you'd still like the hands or rod and bob a separate shipping fee will apply. We always recommend new hands, as older hands may not fit the American I Shaft design.
Shop here for your Pendulums and Hands to Go With This Pendulum Quartz Clock Motor
Learn how to set your Westminster Chime Clock Motor
Install a FRESH Duracell or Energizer Battery (But not a rechargeable type). In our experience, these are the only batteries that are reliable for clock mechanisms.
Write a Review || | Explore all
Featured positive reviews:
Searching for replacement clock movements, lead me to Bear Woods Supply Co. Their movements appeared to be of better quality, larger battery (C not AA), more features and options. Since this movement was to be supported by the dial face, I had to re-enforce the dial/movement with thin piece of wood (paint stir stick.) I was able to use the old banjo pendulum- fits perfectly on pendulum motor hanger. Movement keep accurate time, chimes a nice tone. No problems ! Will I purchase from Bear Woods Supply again ? Yes !
We have been completely satisfied with the service from Bear Woods Supply in providing the ordered parts. We are delighted with our rebuilt clock. We have had this clock for many years and did not want to have to get rid of the clock cabinet as we really like the design. We are pleased with the result. We found your web site helpful. Thank you.
I appreciate your prompt service. The Westminster movement appears identical to the one it replaced. My only disappointment is the chimes; they are low volume, and quite off key; very poor compared to the original, which we've had for 31 years, which we received from friends on our 25th anniversary. I have disconnected the speaker.
I ordered a replacement movement for a clock I had made years ago. It was noticed that I didn’t take advantage of the free clock hands offer and was contacted about it. It was great to see that someone cared enough to check into it as opposed to sending what was ordered. Excellent service! Scrollin Jim
The experience with your company was great as far as ordering and tge shipping was everything promised. However, I was unable to use the movement due to the shaft being too short. I should have measured better.
the staff did a great job my inexperience in choosing items meant I didn't pick out a new set of hands or a pendulum like they recommended
my mistake next time I listen to the pros
This replacement movement was easy to install and fit into the old clock with a minimum of fuss. It was probably better than the original.
The sound is little out of tune. I would prefer a simpler chime, just a ding on the half and the full time and count on the hour.
Service was prompt and thorough. I think better instruction might have saved us some trouble.
Good product works very well chime is not too loud and sounds quite authentic.
The minute hand fixation nut was missing.
The minute hand fixation nut was missing.
**When repairing a clock we always recommend new hands as your old ones may not fit.
| Stock # |
For Clock Dials / |
Threaded Shaft Length |
Overall Shaft Length |
|
Q-53 |
3/8" thick |
7/16" |
3/4" |
|
Runs Clock hands up to 4-1/2" Long. Want to make a larger clock? Consider High Torque Pendulum Clock Movements which will run hands up to 18" Long. |
|||
Hardware Included
Optional Hardware
| Add an Black Endcap for $0.50 |  |
|
| or Add an Endcap for $0.50 |  |
Westminster Chime Pendulum Quartz Clock Movements for Clock Faces up to 3/8" thick
Full-sized quartz movements with built in speaker plays a portion of the traditional Westminster Chimes melody of a grandfather clock every quarter hour, as well as counting out the hours on the hour along with the full Westminster Chimes melody. These are very popular movements, and they are very easy to use! These are great to use as replacement clockworks or when making a new clock.
Pendulum and Chime Clock Mechanisms Features:
- Pendulum + Chime Movements Case Size 3 inches wide x 4-3/4 inches high x 1-1/4 inches deep.
- Chime Synchronization Knob
- Built in Speaker, Full Westminster Chiming Functions
- 1 year Warranty
- Step Second Hand (optional)
- Powered by C Battery (Not Included)
- Mounting hardware (brass washer, hex nut, and open end nut) included. Hangers sold separately.
Westminster Pendulum Clock Mechanism Shopping Tips:
1) Choose your movement based on the thickness of the clock face/dial you are using or making. Learn how to choose the right size clock hands and clock motors.
2) Mix and Match Sizes of Pendulum Clock Movements to get a better price.
3) If you forget to add hands or the pendulum rod/bob and you'd still like the hands or rod and bob a separate shipping fee will apply. We always recommend new hands, as older hands may not fit the American I Shaft design.
Shop here for your Pendulums and Hands to Go With This Pendulum Quartz Clock Motor
Write a Review || | Explore all
Featured positive reviews:
Searching for replacement clock movements, lead me to Bear Woods Supply Co. Their movements appeared to be of better quality, larger battery (C not AA), more features and options. Since this movement was to be supported by the dial face, I had to re-enforce the dial/movement with thin piece of wood (paint stir stick.) I was able to use the old banjo pendulum- fits perfectly on pendulum motor hanger. Movement keep accurate time, chimes a nice tone. No problems ! Will I purchase from Bear Woods Supply again ? Yes !
We have been completely satisfied with the service from Bear Woods Supply in providing the ordered parts. We are delighted with our rebuilt clock. We have had this clock for many years and did not want to have to get rid of the clock cabinet as we really like the design. We are pleased with the result. We found your web site helpful. Thank you.
I appreciate your prompt service. The Westminster movement appears identical to the one it replaced. My only disappointment is the chimes; they are low volume, and quite off key; very poor compared to the original, which we've had for 31 years, which we received from friends on our 25th anniversary. I have disconnected the speaker.
I ordered a replacement movement for a clock I had made years ago. It was noticed that I didn’t take advantage of the free clock hands offer and was contacted about it. It was great to see that someone cared enough to check into it as opposed to sending what was ordered. Excellent service! Scrollin Jim
The experience with your company was great as far as ordering and tge shipping was everything promised. However, I was unable to use the movement due to the shaft being too short. I should have measured better.
the staff did a great job my inexperience in choosing items meant I didn't pick out a new set of hands or a pendulum like they recommended
my mistake next time I listen to the pros
This replacement movement was easy to install and fit into the old clock with a minimum of fuss. It was probably better than the original.
The sound is little out of tune. I would prefer a simpler chime, just a ding on the half and the full time and count on the hour.
Service was prompt and thorough. I think better instruction might have saved us some trouble.
Good product works very well chime is not too loud and sounds quite authentic.
The minute hand fixation nut was missing.
The minute hand fixation nut was missing.
Learn how to set your Westminster Chime Clock Motor
Install a FRESH Duracell or Energizer Battery (But not a rechargeable type). In our experience, these are the only batteries that are reliable for clock mechanisms.
**When repairing a clock we always recommend new hands as your old ones may not fit.
| Stock # |
For Clock Dials / |
Threaded Shaft Length |
Overall Shaft Length |
|
Q-53 |
3/8" thick |
7/16" |
3/4" |
|
Runs Clock hands up to 4-1/2" Long. Want to make a larger clock? Consider High Torque Pendulum Clock Movements which will run hands up to 18" Long. |
|||
Hardware Included
Optional Hardware
| Add an Black Endcap for $0.50 | |
|
| or Add an Endcap for $0.50 | |
Kit - USA Made High-Torque Quartz Clock Mechanism with Hands for 24" Diameter Clock
Add to Cart
Home
Wishlist
Account
Cart